MARK Pro · Premium wearable scanner
Work without interruptions
Scan, confirm and act without leaving the aisle. MARK Pro combines multi-range scanning, four configurable buttons on the back of the hand and ProGlove Services that keep the fleet running.
At a glance
picking and packing
picking and packing
Hyper-efficiency
Faster at the interaction you repeat all day
Close label or high rack
The dual-lens multi-range scan engine reads close labels and distant rack labels, even from a forklift. No repositioning, no stepping closer, fewer re-scans and manual entries.
The trigger sits where the hand already is
The patented scan-trigger position follows the natural hand movement. Workers scan while holding the goods, without gripping a device.
Ready in seconds
Pairs by NFC tap, proximity or Scan2Pair, so the shift starts with scanning, not setup.
Proven ergonomics
Light enough to wear
all shift long
At 45 g, MARK Pro sits low and snag-free on the back of the hand. Less load on the hand across scan-intensive shifts is what gets a wearable worn, day after day.
- Compact enough to move with the work instead of getting in its way.
- Hands stay free for the tote, the carton and the cart handle — nothing to put down, nothing to pick up.
- Worn on the washable Hand Strap, in left- and right-hand versions.
Back-of-hand control
What a press can do
Four configurable buttons turn a single press into a whole workflow step. Each button is set up per workflow, as a single press or press-and-hold — no firmware build, no developer.
One press, one shortcut
Print the shipping label, undo a mis-scan or jump between order and inventory screens. The button sends the keystroke, so there is no reach for keyboard or mouse.
Back-of-hand control
What a press can do
A whole sequence in one press
One button fires a multi-step command such as ENTER, TAB, F5 and confirms the process step at every pick, pack and QA station.
Back-of-hand control
What a press can do
Change what the next scan means
Each button selects a configuration profile, so one device covers picking, packing or inventory across several zones and roles, without touching the host system. Sorting to carts A, B or C? One button per cart, and the LED next to it marks the target.
Back-of-hand control
What a press can do
Several barcodes — or a photo
Switch on the fly to Multiscan (up to five codes per trigger pull) or continuous scanning (up to ten codes in one trigger hold), or open a photo session that sends timestamped evidence to INSIGHT. Requires the Enterprise tier of ProGlove Services.
Back-of-hand control
What a press can do
Run the rest of the station
Acknowledge a pick-by-voice prompt with a press when the aisle is too loud to answer by voice. Send Android key events such as BACK, HOME or DPAD to operate kiosk apps without touching the screen, or show and hide the iOS on-screen keyboard in HID mode.
Industrial reliability
Built to show up
every shift
A battery for multiple shifts
12,000+ scans per charge, so fewer devices are swapped mid-shift.
From cold store to loading dock
Operates from −20 °C to 60 °C (−4 °F to 140 °F).
Rugged by design
IP65-sealed and tested to 1,000 tumbles from 0.5 m.
A steady connection in wide aisles
A configurable BLE channel and Bluetooth long-range mode keep the connection in wide aisles and vehicle-mount setups.
Applications
Where it earns its keep
Picking
Scan location, item and quantity.
Scan the location and the item, confirm the quantity with a button press. Hands stay on the goods and the tote, and one multi-range device covers shelf labels and high racks.
Packing
No reach between scan and print.
At the pack bench, one press releases the shipping label and another undoes a mis-scan. No reach for keyboard or mouse between scan and print.
Line feed
Scan from the vehicle at distance.
On tugger, forklift and AGV routes, scan from the vehicle at distance and confirm the delivery at the line without walking to a terminal. Bluetooth long-range mode keeps the connection along wide routes.
Assembly
Built for dense workstations.
Dense workstations leave no room for a handheld. MARK Pro sits low and snag-free on the hand, one press replaces the function key to confirm the process step, and the multi-color LEDs confirm a correct scan before the part is fitted.
Customer Story
The MARK Pro isn't just a scanner. It's a controller for our warehouse operators, simplifying processes and making them faster.
- Picking became hands-free, keeping workers moving without putting packages down.
- Long-range scanning and on-the-spot product data access reduced unnecessary back-and-forth.
- A reporting button brings the office team in directly. MARK Pro works as a workflow controller, not just a scanner.
ProGlove Services
Services that keep
the fleet running
Every MARK Pro comes with ProGlove Services. Choose the tier that fits your operation: Professional, Enterprise or Custom.
Talk to sales
Care, in every tier
Support built into
every tier
48-hour Advanced Exchange for device and charger, accidental damage cover and faulty battery replacement.
Talk to sales
Professional · Enterprise · Custom
Choose the service
level that fits
Predictive maintenance · Enterprise
A failing battery
stops being a surprise
Battery health is monitored across the fleet, so units that won’t last a shift are swapped on a maintenance plan, not in the middle of a pick. Available in the Enterprise tier.
Talk to salesProduct FAQ
What buyers ask before a demo
Fast answers to the questions teams usually ask when evaluating MARK Pro.
Ask us directlyMARK Pro adds four configurable buttons, multi-range scanning and Services to turn the wearable scanner into a workflow controller.
Yes. It is designed for scan-intensive work and supports 12,000+ scans per charge.
Picking, packing, line feed and assembly workflows benefit when workers need multi-range scanning, fast confirmation and both hands available.
MARK Pro is offered with the ProGlove Services tiers Professional, Enterprise or Custom.
